Shanghai UPG International Trading Co., Ltd

Model Number: PRINTING-TP 2500X1200 Key Specifications/Special Features: Control operation partMemory reset: during the working process, if the machine needs to wipe and change the plate, it can automatically restore to the original position after the machine closedControlled anilox roller lift: when a group of temporary does not require printing, the machine can control this group anilox roll not decline, and thus there is no need to clean the ink rollerPosition reset: machine can reset the plate position, the location of the using plate can be once in place, testing printing two can correct place in generalMain electric motor picture display vehicle speed, paper feed, even paper and separate piecesScreen display order set number and actual production number, machine stop feeding after working quota complete and anilox roller will separate from printing plate automaticallyOrder preset function: according to the requirement of the order you can enter the data of box length, width, height quantity on screen to adjust the characterof box, and Intelligent restored nearby (maximum restored order: 999)

Data include:

• Each printing position
• Slotting position
• Box height position
• Box length and width
• Paper height and width

Machine can intelligent restored nearby after enter, don’t need stop machine

Data storage: when the data of processing is correct, it can autosave the data

Configuration part:

• Feeding unit (1 group)
• Feeding unit precision: ±1.0mm

Machine clutch:

• Motor set on-off alarm and continuous alarm in progressing to ensure personnel safety
• Between every landline station equipped with emergency stop switch, machine can be internal controlled to stop moving to ensure the security of the internal staff
• Total machine locking

Dust removal system:

• Equipped with brush to eliminate dust on the printing surface and improve the printing quality
• Equipped with static electricity system

Convey roller:

• Diameter of the upper roller is Ф141.9mm (according to the models given)
• Seamless pipe, wrapped in wear-resistant rubber, and to do the balancing correction
• Diameter of the lower roller is Ф172mm, embossed hard chrome plating
• Gap scale adjusted through the worm, adjustment range of 0-12mm
• Aluminium alloy surface

Automatic feeding operation control:

• Left baffle, right baffle and push baffle adjusted by electric adjustment
• Back baffle manual adjust
• With counting stop system, foot pedal extended to 900mm and the printing unit (1 color/set) (optional ceramic anilox roller)

Printing precision: ±0.5mm (reset precision: ±0.15mm

Printing roller

Outer diameter: Ф376/Ф390mm